Lamps, specified for your shelf.
Pick an outer shape, set the size and what the lamp should do, and we develop the full specification with you, from the cap and driver to safety review and delivery.
Two paths, one specification.
Start from one of our lamp families or from your own drawing. Either way we develop a single specification together, and you approve every revision.
Start from an Ennobin family
Choose a shape and we propose the specification, then you choose the quality level that fits your price.
- Faster to a first sample
- We recommend materials, driver and light engine
- You set function, colour and price target
Bring your own specification
Start with your shape, your requirements and your design intent. We engineer and make it to your specification.
- Your outer design, profile and finish
- Your component and performance requirements
- Responsibilities and acceptance agreed in writing
Same on both routes: the same review and approval steps, and the same mandatory safety requirements for the market you sell in.
Describe your lamp in four steps.
Fill in what you know and leave the rest. We will come back with questions and a proposed specification.
The sizes we start from.
A-type and T-type lamps are named by their diameter in millimetres. These are the common sizes and the wattages they usually carry.
Standard / A-type
| Size | Ø mm | Height up to, mm | Typical power |
|---|---|---|---|
| A45 · E14 | 45 | 92 | 5 W |
| A45 · E27 | 45 | 90 | 5 W |
| A50 · E14 | 50 | 97 | 7 W |
| A50 · E27 | 50 | 96 | 7 W |
| A55 | 55 | 102 | 8 W |
| A60 | 60 | 126 | 9–15 W |
| A65 | 65 | 132 | 10–15 W |
| A70 | 70 | 143 | 10–15 W |
| A80 | 80 | 167 | 15–22 W |
| A90 | 90 | 181 | 18 W |
| A95 | 95 | 186 | 18–28 W |
| A105 | 105 | 203 | 30 W |
| A120 | 120 | 219 | 40 W |
| A140 | 140 | 252 | 50 W |
| A160 | 160 | 278 | 60 W |
Cylindrical / T-type
| Size | Ø mm | Height up to, mm | Typical power |
|---|---|---|---|
| T50 | 50 | 110 | 5 W |
| T60 | 60 | 131 | 10 W |
| T70 | 70 | 147 | 15 W |
| T80 | 80 | 176 | 20 W |
| T100 | 100 | 197 | 30 W |
| T115 | 115 | 238 | 40 W |
| T120 | 122 | 200 | 40 W |
| T125 | 125 | 259 | 50–60 W |
| T135 | 135 | 276 | 60 W |
| T140 | 143 | 231 | 60 W |
| T150 | 150 | 290 | 70 W |
| T160 | 160 | 323 | 80 W |
| T180 | 180 | 323 | 100 W |
| T200 | 200 | 355 | 120 W |
CandleC38, Ø38 mm · 7–9 W
ReflectorCompact, Ø50 mm · 7–9 W
Capsule / compact columnØ37–50 mm · 7–15 W
9 more shapesGlobe, vintage, mushroom, disc and others, sized to your design
Sizes and wattages are design references, not tested limits. A smaller envelope leaves less room for the driver and heat sink, so the final size and wattage are confirmed in the specification.
We and you, one movement.
Your small turn drives our full one. The same loop as on our home page, applied to a lamp.
- 01 / 10Your turn
Your need
You tell us the lamp: shape, function, who buys it, at what price and volume.
- 02 / 10Our turn
Deconstruct
We take apart your brief into clear requirements, and lamps already selling into cap, driver, LED board, diffuser, body and cost.
- 03 / 10Our turn
Learn
What we find becomes lamp knowledge we keep and reuse, such as how much driver fits each size.
- 04 / 10Our turn
Reconstruct
We design candidate lamps from your brief, on the route you chose.
- 05 / 10Our turn
Simulate
We check heat, light output and fit in software first, with cost and lead time as honest ranges.
- 06 / 10Our turn
Materials
Cap, diffuser, body and light engine, chosen for your lamp and your price.
- 07 / 10Our turn
Industrialise
We build the moulds, fixtures, line and test stations to make it reliably at volume.
- 08 / 10Our turn
Manufacture
We manufacture it.
- 09 / 10Our turn
Test
Tested against the agreed specification and certified for the markets you sell in.
- 10 / 10Your turn
Your product
Delivered under your brand. Every change is recorded against the revision you approved.
10 → 01 Your product starts the next turn. See the loop in motion →