Ennobin
What we make / 01 Lighting

Lighting, made under your brand.

LED lamps and luminaires, and the drivers, optics and controls inside them. Bring us a light you want to sell. We engineer it, make it and get it certified for your market.

LED bulbA60 · E27 / B22
The range

15 lighting families.

From a half-watt night light to a 200-watt high-bay. Every family can be made to your design, your specification and your price.

  • 01.01

    Lamps

    Everyday bulbs, high-wattage bulbs, inverter and backup bulbs that keep working in a power cut, and decorative lamps.

    Power
    0.5 – 50 W
    Light
    Cool daylight, warm white
    Explore lamps →
  • 01.02

    Battens and linear lighting

    Tube-style battens for homes and offices, slim cabinet battens and sensor battens.

    Power
    5 – 50 W
    Light
    3000 K, 4000 K, 6500 K, colour-selectable
  • 01.03

    Panels and diffuse downlights

    Recessed and surface panels, round and square, from slim to deep-glare downlighters.

    Power
    3 – 24 W
    Light
    3000 K, 4000 K, 6500 K, colour-selectable
  • 01.04

    Spots, track and directional lighting

    COB downlights that are fixed, tilting, deep-recessed or low-glare, plus surface spots and track lights.

    Power
    2 – 30 W
    Light
    2700 K to 6500 K
  • 01.05

    Decorative and task lighting

    Wall lights, up-down lights, string lights, filament lamps and cabinet lights.

    Power
    2 – 25 W
    Light
    Warm white, multicolour
  • 01.06

    Flexible lighting and strips

    12 V strips, 230 V rope lights, aluminium profiles, IP65 outdoor versions and RGB sets with remote.

    Power
    Per metre or reel
    Light
    3000 K to 6500 K, RGB, single colours
  • 01.07

    Outdoor and utility lighting

    Bulkheads, gate lights, outdoor wall lights and lights with motion sensors.

    Power
    1.5 – 20 W
    Light
    Mostly warm white
  • 01.08

    Portable and emergency lighting

    Rechargeable lanterns, torches, head torches, emergency lights and solar lights.

    Power
    1 – 10 W
    Light
    Cool white
  • 01.09

    Components and accessories

    LED drivers for panels, strips and tracks, lamp holders, mounting rings and track rails.

    Power
    Drivers 3 – 120 W
    Light
    Matched to the light
  • 01.10

    Plug-in night lights

    Two-pin night lights, including motion-sensor versions and coloured lights.

    Power
    0.5 – 5 W
    Light
    White and colours
  • 01.11

    High-bay and industrial lighting

    UFO high-bays, low-bays, well-glass and canopy lights for factories, warehouses and fuel stations.

    Power
    40 – 200 W
    Light
    5700 K to 6500 K
  • 01.12

    Street and area lighting

    Street lights and flood lights for roads, yards, campuses and sports grounds.

    Power
    10 – 200 W
    Light
    3000 K to 6500 K
  • 01.13

    Façade and landscape lighting

    Step lights, in-ground lights, wall washers, spike lights and bollards.

    Power
    2 – 25 W
    Light
    Warm white, RGB
  • 01.14

    Controls and smart-lighting systems

    Smart and retrofit switches, Bluetooth Mesh gateways and remotes, strip controllers and smart plugs.

    Power
    Switching up to 16 A
    Light
    Works with any colour
  • 01.15

    Specialty lighting

    Stage and effect lights with RGB and RGBW colour mixing.

    Power
    Around 120 – 160 W
    Light
    RGB, RGBW
Inside the light

We engineer every part, not just the case.

How long a light lasts and how good it looks depends on what is inside. These are the five parts we design and source for each product.

Driver Heat sink LED board Optic Light out
  • LED boardLED chips matched for colour, on a metal-core board that pulls heat away from them.
  • DriverThe electronics that power the LEDs. Flicker-free output, high power factor and surge protection.
  • OpticsLenses, reflectors and diffusers that put the light where it is needed and keep glare down.
  • Heat and housingAluminium heat sinks and sealed housings that keep the LEDs cool and the dust and water out.
  • ControlsDimming and smart control: triac, 0–10 V, DALI, Zigbee, Bluetooth Mesh and Matter.
The data sheet

Every light ships with numbers you can check.

These are the figures buyers, specifiers and regulators look at. We measure them on samples and on production units, so the box matches the product.

What we measureUnitWhat it tells your buyer
Light outputlmHow much light it gives
Efficacylm/WHow much light per watt of electricity
Colour temperatureKWarm (2700 K) to cool daylight (6500 K)
Colour renderingCRI RaHow true colours look under the light
FlickerPst LM · SVMWhether the light flickers on camera or to the eye
LifetimeL70 hHours until output falls to 70% of new
Ingress protectionIPHow well it keeps out dust and water
Surge protectionkVHow well it survives spikes on the mains
Markets

Designed for the rules where you sell.

Each market has its own safety, energy and labelling rules. We design to them from the first sketch, so certification is not a surprise at the end.

INIndia
  • BIS registration
  • IS 16102 for LED lamps
  • IS 10322 for luminaires
  • BEE star labelling
UKUnited Kingdom
  • UKCA marking
  • UK energy label
  • Fire-rated downlight tests
USNorth America
  • UL 8750 and UL 1598
  • FCC Part 15
  • ENERGY STAR and DLC

Selling somewhere else? Tell us the country and we will tell you what the product needs.

How we work

We and you, one movement.

Your small turn drives our full one. This is the same loop as on our home page, applied to a lighting product.

  1. 01 / 10Your turn

    Your need

    You tell us the light: what it does, who buys it, where it sells, at what price and volume.

  2. 02 / 10Our turn

    Deconstruct

    We take apart your brief into clear requirements, and the lights already on the shelf into LED board, driver, optic, housing and cost.

  3. 03 / 10Our turn

    Learn

    What we find becomes lighting knowledge we keep and reuse, such as heat limits and driver choices.

  4. 04 / 10Our turn

    Reconstruct

    We design candidate lights from your requirements.

  5. 05 / 10Our turn

    Simulate

    We check heat, light output and glare in software first, with cost and lead time as honest ranges.

  6. 06 / 10Our turn

    Materials

    LEDs, driver parts, optics and housing materials, chosen for your light.

  7. 07 / 10Our turn

    Industrialise

    We build the moulds, fixtures, assembly line and test stations to make it reliably at volume.

  8. 08 / 10Our turn

    Manufacture

    We manufacture it.

  9. 09 / 10Our turn

    Test

    Measured against the data sheet and certified for the markets you sell in.

  10. 10 / 10Your turn

    Your product

    Delivered under your brand. What we learned makes the next light faster.

10 → 01 Your product starts the next turn. See the loop in motion →

Start

Tell us about the light you want to sell.

A product you sell today, a drawing, or only an idea. We will tell you how we would build it.